Answering System
35
2 {V}/{^}: “Answer System” i
M
3 {V}/{^}: “Settings” i M
4 {V}/{^}: “Number of Rings” i
M
5 {V}/{^}: Select the desired setting.
i M i {ih}
For Telecom Call Minder or
TelstraClear Message Mailbox service
subscribers
To receive Call Minder or Message
Mailbox messages and use the unit’s
answering system properly, please note
the following:
L “Call Minder” and “Message Mailbox”
are services provided by your service
provider/telephone company (page
37). You will need to first subscribe or
activate this service through your
service provider/telephone company.
Contact your service provider/
telephone company on how to operate
this service and how you will be
notified that you have messages. To
use this service you will be required to
leave your answering machine off on
your unit (page 30). This will allow the
service to receive any messages. This
unit has a visual indicator (0) to
indicate new messages. Your service
provider/telephone company also
uses a “Stutter” dial tone to indicate
new messages.
L To use the unit’s answering machine
rather than the service provided by
your service provider/telephone
company, please contact your service
provider/telephone company to have it
removed or deactivated permanently
or temporarily. Alternatively you can
leave this service connected and
change the “Number of Rings” to a
shorter duration on your unit so your
unit’s answering machine can pick up
the call prior to the service provided by
your service provider/telephone
company.
Note:
L This service can capture messages
while the user is on a dial-up Internet
connection.
Caller’s recording time
You can change the maximum message
recording time allotted to each caller.
You can also select “Greeting Only”
which sets the unit to greet callers but
not record messages. The default
setting is “3 Minutes”.
1 K (middle soft key)
2 {V}/{^}: “Answer System” i
M
3 {V}/{^}: “Settings” i M
4 {V}/{^}: “Recording Time” i
M
5 {V}/{^}: Select the desired setting.
i M i {ih}
Note:
L You may create your own greeting-
only message by following the steps
on page 31.
The unit plays the pre-recorded
greeting-only message asking callers
to call again if your own greeting-only
message is not recorded.
Call screening
You can set the call screening feature
“On” or “Off”. For details, see page 30.
The default setting is “On”.
1 K (middle soft key)
2 {V}/{^}: “Answer System” i
M
3 {V}/{^}: “Settings” i M
4 {V}/{^}: “Call Screening” i
M