Filter
Top Products
Useful Information
45
Making/answering calls, intercom
*1 KX-TG7321/KX-TG7322
Problem Cause/solution
w is flashing. L The handset is not registered to the base unit. Register
it (page 26).
L The handset is too far from the base unit. Move closer.
L The base unit’s AC adaptor is not connected. Check
the connections.
L You are using the handset or base unit in an area with
high electrical interference. Place the base unit and
use the handset away from sources of interference.
Noise is heard, sound
cuts in and out.
L You are using the handset or base unit in an area with
high electrical interference. Place the base unit and
use the handset away from sources of interference.
L Move closer to the base unit.
L If you use a DSL/ADSL (JetStream) service, we
recommend that you contact your DSL/ADSL service
provider to have a DSL/ADSL Splitter installed. We do
not recommend the use of generic DSL/ADSL filters.
Contact your DSL/ADSL service provider for details.
The handset does not
ring.
L The ringer volume is turned off. Adjust ringer volume
(page 23).
The base unit does not
ring.
*1
L The ringer volume is turned off. Adjust ringer volume
(page 24).
I cannot make a call. L The handset is too far from the base unit. Move closer
and try again.
L Another unit is in use. Wait and try again later.
L Answering system is being used.
*1
Wait and try again
later.
L If you are using a BT double adaptor to connect the
unit, remove the adaptor and connect the unit to the
phone wall socket directly. If the unit operates properly,
check or replace the adaptor.
L The key lock feature is turned on. Turn it off (page 20).
L The unit is not designed to be used with rotary/pulse
dialling services.