Filter
Top Products
Answering System
48 For assistance, please visit http://www.panasonic.com/phonehelp
Note:
LIf the message memory becomes full,
the unit automatically switches to the
“Greeting only” mode and no new
messages are recorded. If you have
recorded your own greeting message,
that same greeting message is
announced to callers even though their
messages are not recorded. If you have
not recorded your own greeting
message, the prerecorded message
used for “Greeting only” mode is
announced to callers (page 41).
Remote code
A remote code must be entered when
operating the answering system remotely.
This code prevents unauthorized parties
from listening to your messages remotely.
The default setting is “11”.
1 {MENU} i {0}{6}{3}
2 Enter the desired 2-digit remote code.
i {SAVE} i {OFF}
Recording mode
You can select a recording mode.
Enhanced recording provides improved
sound quality, but the total recording
capacity is reduced.
The default setting is “Standard
recording 60min”.
1 {MENU} i {0}{6}{4}
2 Select the desired setting. i {SAVE}
i {OFF}
Message alert
You can select whether or not the
message indicator on the handset slowly
flashes in amber when new messages are
recorded (page 43). The default setting is
“Off”.
1 {MENU} i {0}{#}
2 Select the desired setting. i {SAVE}
i {OFF}
Note:
LWhile message alert feature is on,
battery operating time is shortened
(page 14).
LIf you have new messages and
message alert feature is on, the
message indicator does not indicate
battery charge status (page 13). The
indicator slowly flashes in amber until
you listen to all new messages.
Handset
Handset
Handset
TG6700.book Page 48 Monday, April 24, 2006 10:28 AM