Filter
Top Products
Making/Answering Calls
For assistance, please visit http://www.panasonic.com/phonehelp 23
Answering calls
Using the handset
1 Lift the handset and press {C} or {s}.
LThe called line is automatically
selected.
LYou can also answer the call by
pressing any button except navigator
key or {OFF}. (Any key talk feature)
2 When you finish talking, press {OFF}.
Note:
LYou can also answer the call by pressing
{LINE1} or {LINE2} in step 1.
LTo change the line selection, see page
20.
Auto talk
This feature allows you to answer a call by
simply lifting the handset off the base unit
or charger. You do not need to press {C}.
To activate this feature, see page 37.
Temporary ringer off
While the handset is ringing for a call, you
can turn the ringer off temporarily by
pressing {OFF}.
Using the base unit
1 {SP-PHONE}
LThe called line is automatically
selected.
2 Speak into the MIC.
3 When you finish talking, press {SP-
PHONE}.
Note:
LYou can also answer the call by pressing
{LINE1} or {LINE2} in step 1.
LTo change the line selection, see page
20.
Adjusting the ringer volume
1 Press {LINE SELECT} repeatedly to
select the desired line when in standby
mode.
LYou cannot set the ringer volume for
both lines at the same time.
2 Press {^} or {V} repeatedly to select
the desired volume.
LTo turn the ringer off, press and hold
{V} until the unit beeps.
LTo stop ringing, press {STOP}.
TG6700.book Page 23 Monday, April 24, 2006 10:28 AM