Panasonic KX-TG6700 Answering Machine User Manual


 
Base Unit Speed Dialer
For assistance, please visit http://www.panasonic.com/phonehelp 31
Base unit speed dialer
You can assign one phone number to each
of the 10 dial keys ({0}{9}) on the base
unit.
Adding phone numbers to the
speed dialer
Important:
LBefore adding phone numbers, make
sure the base unit is not being used.
1 {PROGRAM}
2 Enter the phone number (max. 32
digits).
LIf a pause is required for dialing,
press {PAUSE} where needed.
LIf you misdial, press {STOP} and
repeat from step 1.
3 {PROGRAM}
4 Press a dial key ({0}{9}).
Note:
LIf a phone number is assigned to a dial
key which already contains a phone
number, the old number will be erased.
LWe recommend you make a note of
which phone numbers are stored in
which dial keys.
PAUSE button (for PBX/long distance
service users)
A pause is sometimes required when
making calls using a PBX or long distance
service.
For example, if you need to dial the line
access number “9” when making outside
calls with a PBX:
In step 2, press {9}, {PAUSE}, then enter
the phone number.
Note:
LA 3.5 second pause is inserted each
time {PAUSE} is pressed. Press
repeatedly to insert longer pauses. “P
is displayed when {PAUSE} is pressed.
LWhen {*} is pressed, “$” is displayed.
When {#} is pressed, “#” is displayed.
To erase a stored phone number
1 Press {PROGRAM} 2 times.
2 Press the desired dial key ({0}{9}).
Calling someone with the speed
dialer
1 {SP-PHONE} i {AUTO}
2 Press the desired dial key ({0}{9}).
Note:
LSpeed dial numbers assigned to the
base unit dial keys can only be dialed
from the base unit.
TG6700.book Page 31 Monday, April 24, 2006 10:28 AM