Filter
Top Products
Making/Answering Calls
22 For assistance, please visit http://www.panasonic.com/phonehelp
Using the base unit
1 {SP-PHONE}
LAn available line is automatically
selected and LINE1 or LINE2
indicator lights.
2 Dial the phone number.
3 When the other party answers, speak
into the MIC.
LSpeak alternately with the other party.
4 When you finish talking, press {SP-
PHONE}.
Note:
LYou can also select a line by pressing
{LINE1} or {LINE2} in step 1.
LUse the speakerphone in a quiet
environment.
LWhile on a call, you can switch from the
base unit to the handset:
– Press {LINE1} or {LINE2} on the
handset, then press {SP-PHONE} on
the base unit.
– If the handset is on the base unit,
simply lift it.
LTo change the line selection, see page
20.
Adjusting the speaker volume
Press {^} or {V} repeatedly while talking.
Redialing the last number dialed
{SP-PHONE} i {REDIAL}
Understanding the indicators
The LINE1 and LINE2 indicators show the
status of each line as follows.
Status Meaning
Light off The line is free.
Light on The line is in use.
Flashing
rapidly
A call is being received.
Flashing A call is put on hold or the
answering system is
answering a call.
TG6700.book Page 22 Monday, April 24, 2006 10:28 AM