Filter
Top Products
Multi-unit Operation
65
Conference calls
The handset and base unit, or 2 handsets
can have a conference call with an outside
party.
1 During an outside call, press
{INTERCOM} to put the call on hold.
2 Select the desired unit. i {CALL}
3 Wait for the paged party to answer.
4 When the paged party answers, press
{CONF} to make a conference call.
L To leave the conference, press
{OFF}. The other parties can
continue the conversation.
L To put the outside call on hold, press
{HOLD}. To resume the conference,
press {CONF}.
1 During an outside call, press
{INTERCOM} to put the call on hold.
2 To page a specified handset, enter its
extension number ({1} – {8}).
To page all handsets, press {0}.
3 Wait for the paged party to answer.
4 When the paged party answers, press
{CONF} to make a conference call.
L To leave the conference, press {SP-
PHONE}. The other parties can
continue the conversation.
L To put the outside call on hold, press
{HOLD}. To resume the conference,
press {CONF}.
Registering a handset
The included handset and base unit are
preregistered. If for some reason the
handset is not registered to the base unit,
register the handset.
Important:
L If you have already deregistered the
handset, perform steps 2 and 3 only.
1 Handset:
{MENU} (middle soft key) i
{#}{1}{3}{0}
2 Base unit:
Press and hold {INTERCOM} until the
IN USE indicator flashes.
L After the IN USE indicator starts
flashing, the rest of the procedure
must be completed within 90
seconds.
3 Handset:
Press {OK}, then wait until a beep
sounds.
Registering an additional handset
See page 6 for information on the available
models and extension numbers.
Start from step 2.
Deregistering a handset
1 {MENU} (middle soft key) i
{#}{1}{3}{1}
2 {3}{3}{5} i {OK}
Handset
Base unit
Handset
TG5971AL_5976AL.book Page 65 Friday, March 3, 2006 3:32 PM