Filter
Top Products
Programming
50
Erasing a melody
1 {MENU} (middle soft key) i
{#}{1}{6}{6}
2 “List” i {SELECT}
3 Select the desired item. i {MENU}
4 “Erase” i {SELECT}
5 “Yes” i {SELECT} i {OFF}
Note:
L If the erased melody was used for the
handset ringer tone (page 48), “Tone 1”
(default) is used instead of that melody.
L If the erased melody was assigned to
certain callers as ringer ID (page 37), the
ringer ID assignment is canceled, and
the handset ringer tone (page 48) is
used instead of that song.
Changing the handset name
Each handset can be given a customized
name (“Bob”, “Kitchen”, etc.), this is useful
when you make intercom calls between
handsets. The default setting is “Handset
1” to “Handset 8”.
You can also select whether or not the
handset name is displayed in standby
mode. The default setting is “Off”.
1 {MENU} (middle soft key) i
{#}{1}{0}{4}
2 Enter the desired name (max. 10
characters; page 32).
L If not required, go to step 3.
3 {OK}
4 Select the desired setting. i {SAVE}
i {OFF}
Handset
Handset
TG5971AL_5976AL.book Page 50 Friday, March 3, 2006 3:32 PM