Filter
Top Products
Programming
45
Programming using the direct commands
1 {MENU} (middle soft key) i {#}
2 Enter the desired feature code.
3 Enter the desired setting code.
L This step may vary depending on the feature being programmed.
4 {SAVE} i {OFF}
Note:
L In the following table, < > indicates the default setting.
L If you make a mistake or enter the wrong code, press {OFF}, then start again from step
1.
Feature Feature
code
Setting code System
setting
*1
Page
Auto talk
*2
{2}{0}{0}{1}: On {0}: <Off>–25
Auto Intercom {2}{7}{3}{1}: On(Ringer On)
{2}: On(Ringer Off)
{0}: <Off>
–63
Call screening {3}{1}{0}{1} : <On> {0}: Off r 60
Custom ring
(Customized ringer tone
for handset)
{1}{6}{6} ––48
Dial lock {6} (page 28) r –
Date and time {1}{0}{1} – r 23
Deregistration {1}{3}{1} ––65
Handset name {1}{0}{4} ––50
HS registration
(Handset registration)
{1}{3}{0} ––65
Key tone
*3
{1}{6}{5}{1}: <On> {0}: Off ––
LCD contrast
(Display contrast)
{1}{4}{5}{1}–{6}: Level 1–6 <3> – –
Message alert {3}{4}{0}{1}: On {0}: <Off>–60
TG5971AL_5976AL.book Page 45 Friday, March 3, 2006 3:32 PM