Filter
Top Products
One-Touch Dialer
34
You can store a phone number in the (DIRECT) button of the handset. The
stored number is dialed with a one-touch operation.
Storing a Phone Number in the DIRECT Button
Make sure the unit is in the standby mode initially.
1
Press (FUNCTION/CH).
2
Press Ö or Ñ repeatedly until the arrow
points to “Program”.
3
Press á (Yes key).
4
While the arrow points to “Save
DIRECT#”, press á (Yes key).
5
Enter a phone number, up to 22 digits.
•Each time you press (CLEAR/INTERCOM) the
digit to the left of the cursor is erased. To erase
all digits, press and hold (CLEAR/INTERCOM).
•To move the cursor, press Ü or á.
6
Press Ö (Next key).
•If you want to edit the entered number, press
Ñ (Edit key) and return to step 5.
7
Press á (Save key).
•A beep sounds.
•To return to the standby mode, press (OFF).
•You can exit the programming mode any time by pressing (OFF).
•If a pause is required for dialing, (REDIAL/PAUSE) can be stored in a phone
number in step 5. This counts as one digit (p. 49).
IH G
=Next
1234567890123456
789012
IH G
=Next
1234567890123456
789012
F
=Edit
H
=Save
1234567890123456
789012
Save DIRECT#
H
Program
GF H
=Yes
H
Save DIRECT#
Set flash time
GF H
=Yes