Filter
Top Products
82
General
Problem
The unit does not work.
You cannot program items,
such as the dialing mode.
Remedy
•Check the settings (p. 13–17).
•Charge the battery fully (p. 14).
•Clean the charge contacts and charge
again (p. 15).
•Install the battery properly (p. 14).
•Place the handset on the base unit and
unplug the AC adaptor to reset. Plug in,
and try again.
•Re-install the battery and place the
handset on the base unit (p. 77). Try
again.
•Programming is not possible while the
unit is in the talk or speakerphone mode,
when viewing the Caller List/directory list,
or while the answering system is in use.
•Do not pause for over 60 seconds while
programming.
•Move closer to the base unit.
•Ö, Ñ, Ü or á may have been
pressed when you picked up the
handset. Press (OFF) and try again.
Troubleshooting
Problem
You cannot operate the
answering system with the
handset.
While recording a greeting
message, the unit starts to
ring and stops recording.
During playback, the unit
starts to ring and stops
playback.
Remedy
•Someone is operating the answering
system.
•You are too far from the base unit.
Move closer to the base unit.
•The unit is recording a message.
To answer the call, press or .
•To answer the call, press (SP-PHONE),
or . Start again from the
beginning after hanging up.
•To answer the call, press (SP-PHONE),
or . To resume playback, press
(MESSAGE!PLAYBACK/SLOW!TALK)
after hanging up.