Panasonic KX-TG2257S Telephone User Manual


 
24
Preparing the Answering System
To check the recorded greeting message
Press (GREETING).
To erase the recorded greeting message
Press (GREETING), and then press (ERASE) while the message is being
played.
The unit will answer a call with a pre-recorded greeting.
Pre-recorded greeting message
If you do not record a greeting message (p. 23), one of two messages will
be played when a call is received, depending on the callers recording
time (p. 28).
To check the pre-recorded greeting, press (GREETING).
A pre-recorded greeting will be played as follows:
When the recording time is set to 1 minute, 2 minutes or 3 minutes:
“Hello, we are not available now. Please leave your name and phone number
after the beep. We will return your call.”
When the recording time is set to Greeting only:
“Hello, we are not available now. Please call again. Thank you for your call.”
Flash Memory Message Backup
Messages are stored on a “flash memory IC chip and will not be
affected by power failures. All messages are saved until you erase
them.