Filter
Top Products
SMS (Short Message Service)
40
Note:
L If you change the name of a mailbox
which has messages in the receive list,
the messages will remain in the receive
list under the new mailbox name.
L If you erase a mailbox, its messages will
also be erased.
Storing the PBX line access
number (for PBX users only)
Store your PBX line access number (4 digits
max.) so that SMS messages are sent
properly. When sending SMS messages to
entries in the phonebook or redial list, the
PBX line access number will be deleted.
1 Press $ (middle soft key).
2 Select X, then press ,.
3 Select “Public”, then press ,.
4 Select “Settings”, then press ,.
5 Enter “0000” (default base unit PIN).
L If you changed the PIN, enter it (page
30).
6 Select “PBX Access No.”, then press
,.
7 Select “On”, then press ,.
8 Enter your PBX line access code and a
dialling pause, if necessary, then press
, 2 times.
9 Press {ih}.
TG1850AL(e).book Page 40 Monday, December 6, 2004 9:10 PM