Filter
Top Products
Useful Information
68
SMS (Short Message Service)
Problem Cause & solution
I cannot send or receive SMS
messages.
L You have not subscribed to the appropriate service.
Consult your service provider.
L The SMS message centre number(s) are not stored
or are incorrect. Store the correct numbers (page
41).
L You may request that your service provider block
your phone number when making phone calls. In
order to send messages, you need to add “1832” to
the beginning of the Message Centre 1 number
(page 41). Note that by doing so, your phone
number will be sent along with your SMS
messages.
L Message transmission was interrupted. Wait until
the message has been sent before using other
telephone functions.
L SMS message memory is full. Erase unnecessary
message in the receive and send lists (page 43,
44).
L Your unit is connected to a telephone line with
ADSL service. We recommend connecting a filter
(contact your ADSL service provider) to the
telephone line between the base unit and the
telephone line jack.
“FD” is displayed. L The unit could not connect to the SMS message
centre. Confirm that the correct SMS message
centre numbers are stored (page 41). Confirm that
SMS is turned on (page 41).
“FE” is displayed. L An error occurred while sending the message. Try
again.
“E0” is displayed. L Your phone number is permanently withheld or you
have not subscribed to the appropriate service.
Consult your service provider.
“Q” is not displayed after you read
a message. An error code (“FD”,
“FE”, or “E0”) is displayed.
L When an error code is displayed, “Q” will not be
displayed even if you have read the message.
TG1810_1822AL(e-e).book Page 68 Tuesday, March 1, 2005 6:46 PM