Filter
Top Products
3.3 Installation of the Hybrid IP-PBX PC Programming Software
130 Installation Manual
Notes
• During long programming sessions, it is highly recommended that you periodically save the system
data to the SD Memory Card. If the Hybrid IP-PBX suffers a sudden power failure or if the system
is reset for some reason and all system data is lost, it can be restored from the SD Memory Card.
To save the system data to the SD Memory Card, either click the "SD Memory Backup" icon, or
exit KX-TDA50 Maintenance Console and click "Yes" to save when prompted.
• When programming Hybrid IP-PBX data which can be displayed on a proprietary telephone (PT)
(extension names, group names, System Speed Dialing names, etc.), it is possible to enter
characters which cannot be displayed on a KX-T7600 series PT.
Characters which can be displayed on a KX-T7600 series PT are shown below in the white cells.
• The PC will not perform any shutdown operation, or enter the power-saving system standby mode
while the KX-TDA50 Maintenance Console is connected to the Hybrid IP-PBX. To perform either
of the operations above, first close the connection to the Hybrid IP-PBX.
7. The program menu appears. You may now begin
programming the Hybrid IP-PBX.