Filter
Top Products
3.3 Installation of the Hybrid IP-PBX PC Programming Software
128 Installation Manual
Installing the KX-TDA50 Maintenance Console
Notes
• Make sure to install and use the KX-TDA50 Maintenance Console for MPR version 2.0.
• To install or uninstall the software into Windows 2000 Professional or Windows XP Professional,
the user must be grouped either of "Administrators" or "Power Users".
• When the Hybrid IP-PBX is first connected to the PC via USB, a wizard should appear and ask you
to select the appropriate USB driver. Browse for and select the KX-TDA USB driver, which is copied
to the local drive during installation.
Starting the KX-TDA50 Maintenance Console and Assigning the Basic
Items (Quick Setup)
When you start the KX-TDA50 Maintenance Console with the Installer Level Programmer Code and connect
to the Hybrid IP-PBX for the first time after initialization (with the factory default setting), Quick Setup will
launch automatically. During Quick Setup, you will setup the following basic items:
• Date and Time of the Hybrid IP-PBX. The date and time set on the PC will be used.
• System Password for installer for PC programming.
• Operator extension numbers. Operator extensions for all time modes (day/lunch/break/night) can
be assigned.
• Flexible Numbering type to pattern 1 or pattern 2. If pattern 1 (with ) is selected, " " must prefix
all feature numbers (except access numbers) when an extension user wants to use a feature.
• Operator call and Idle Line Access/ARS numbers (0 or 9). The feature numbers for operator call
and Idle Line Access/ARS can be selected.
• Remote Maintenance Dial Number. Enter the complete telephone number of the Hybrid IP-PBX
(including the country code). When necessary, this number will be used to access the Hybrid IP-
PBX from a remote location for maintenance purposes.
1. Copy the KX-TDA50 Maintenance Console setup file to a
local drive on the PC. (Its icon is shown here, on the left.)
2. Double-click the setup file to run the installer.
3. Follow the on-screen instructions provided by the
installation wizard.
1. Connect the PC to the Hybrid IP-PBX with a USB cable.
2. Start the "KX-TDA50 Maintenance Console" from the
Start menu.