Filter
Top Products
3.3 Installation of the Hybrid IP-PBX PC Programming Software
Installation Manual 135
Notes
• During a long programming session, it is highly recommended that you periodically save the
system data to the SD Memory Card. If the Hybrid IP-PBX undergoes a sudden power failure or if
the system is reset for some reason, all the system data in RAM will be lost. However, if system
data has been saved to the SD Memory Card, it can be easily restored.
To save the system data to the SD Memory Card, (1) click the "SD Memory Backup" icon before
resetting the Hybrid IP-PBX or turning off the power, or (2) exit the KX-TDA50 Maintenance
Console so that the Hybrid IP-PBX automatically saves the system data.
• When programming Hybrid IP-PBX data which can be displayed on a proprietary telephone (PT)
(extension names, group names, System Speed Dialing names, etc.), it is possible to enter
characters which cannot be displayed on a KX-T7600 series PT.
Characters which can be displayed on a KX-T7600 series PT are shown below in the white cells.
• The PC will not perform any shutdown operation, or enter the power-saving system standby mode
while the KX-TDA50 Maintenance Console is connected to the Hybrid IP-PBX. To perform either
of the operations above, first close the connection to the Hybrid IP-PBX.
The system menu appears. You may now begin
programming the Hybrid IP-PBX.