Filter
Top Products
2.7 Connection of 2.4 GHz Portable Stations
Installation Manual 111
PS Registration
When the PS has not been registered yet
When registering the PS for the first time, it is possible to select the desired language for the display.
(You do not need to enter the PS system programming mode when registering for the first time.)
Using the KX-TD7680
Using the KX-TD7690
When the PS has already been registered to another Hybrid IP-PBX
One PS can be registered to a maximum of 4 different Hybrid IP-PBXs.
Using the KX-TD7680
Using the KX-TD7690
Setting the System Lock
When a system lock has been set, the system lock password will be required for PS system setting.
Using the KX-TD7680
[690]
001 to 028
PS No.
1 to 4 digits
END
ENTER ENTER
To the PS
operation
below
Extn. No.
Press
POWER for
2 seconds.
Press S3
for 2
seconds.
C.Tone
Press S2 repeatedly
to select the desired
language.
[
F2
]
[
F3
]
Press
POWER for
2 seconds.
Press S3
for 2
seconds.
C.Tone
Press S2 repeatedly
to select the desired
language.
F2
F3
Choose
"SYSTEM 1–4".
Select
"REGISTRATION".
C.Tone
Choose
"SYSTEM 1–4".
Select
"REGISTRATION".
S1S1
SEL SEL
C.Tone
Choose
"Enable/Disable".
Select
"SYSTEM LOCK".
C.Tone
4 digits
4 digits
ENABLE
DISABLE
System Lock Password
System Lock Password