Filter
Top Products
4.1 Troubleshooting
200 User Manual
4.1 Troubleshooting
4.1.1 Troubleshooting
Troubleshooting
Problem Remedy
The telephone does not work properly.
• Confirm with your manager that your settings are
correct.
• If the problem persists, consult your dealer.
The telephone does not respond when
buttons are pressed.
• The telephone is locked.
Unlock your telephone. ( 1.5.4 Preventing
Other People from Using Your Telephone (Extension
Dial Lock), 2.1.1 Extension Control)
• Your telephone is connected to an eXtra Device
Port.
System programming is required. Consult your
dealer.
Some features do not work. • System management may restrict certain features.
Consult your manager.
• The feature numbers have changed.
Confirm the revised number and try again.
Even though following the manual
instructions, none of the operations
work when using a proprietary
telephone.
• The Intercom line was not seized. The seized line,
when going off-hook, was changed by personal
setting. ( 3.1.2 Settings on the Programming
Mode)
In the manual, going off-hook means an Intercom
line is seized.
If the setting has been changed, press the INTERCOM
button after going off-hook and follow the instructions.
The parallelled single line telephones do
not ring.
• "No ring" may be selected.
Change the setting to ring. ( 1.7.11 Setting the
Parallelled Telephone to Ring (Parallelled Telephone))
The telephone does not work using the
personal settings or with other settings.
(One-touch dialling, forwarding
destination, etc.)
• The extension line has been changed. The previous
telephone's settings have not been cleared.
Clear the settings and then programme your
desired settings again. ( 1.7.13 Clearing Features
Set at Your Extension (Extension Feature Clear), 3.1.1
Customising Your Phone (Personal Programming),
3.1.3 Customising the Buttons)