Filter
Top Products
1.10 Administrative Features
User Manual 143
1.10 Administrative Features
1.10.1 Using the Telephones in a Hotel-type Environment
(Hospitality Features)
–Check-in
–Check-out
– Setting a Timed Reminder to a Room Extension (Remote Wake-up Call)
Check-in
The hotel operator can change the room status of extensions to check-in by using the Check-in button
assigned on his extension.
To check in
In a hotel-type environment, an extension assigned as a hotel operator can be used to
view and set the check-in/check-out status of each guest room extension. When the hotel
operator presses a flexible button assigned as "Check-in" or "Check-out" on his extension,
the extension will switch to Room Status Control mode, and the light of the DSS button for
each room extension will show the current room status. This allows the hotel operator to
manage guests and rooms with just a telephone. In addition, the hotel operator can set
automatic wake-up calls for guest rooms.
• The hotel operator must be using a 6-line display PT to use the Check-in and Check-out
features.
• While in Room Status Control mode:
a. The hotel operator's extension can only check extensions in or out. All other operations
will be ignored.
b. The light of each DSS button shows the room status of the corresponding extension as
follows:
Off: Check-out
Red on: Check-in
c. The lights of other buttons may not show their normal display.
d. The hotel operator's extension is considered to be busy. Callers to that extension will hear
a busy tone.
Press Check-in. Dial extension number and then press
"ENTER", or press desired DSS.
OR
extension no.
(DSS)
While on-hook
ENTER
Display PT
Press "YES".
Press "EXIT"
or Check-in.
YES
EXIT
OR
(Check-in)
(Check-in)