Filter
Top Products
41
Cordless Telephone
Handset Settings
Setting the Direct Call ON/OFF
• If the direct call mode is turned off, “ ” will disappear.
• If you did not set the Direct Call Number and select “On” in step 5, “Enter Phone
No” will be displayed. Enter the number, then press twice.
Other Options
To exit the operation, press at any time.
Changing the Handset PIN (Personal Identification Number)
The factory preset is 0000.
Follow steps 1 to 3 on the previous page, then:
4
Select “Direct On/Off”.
5
Select “On” or “Off”.
1
Press JOYSTICK
(or move).
2
Select “ Setting
Handset”.
3
Select “Other
Option”.
Go to step 4.
Once you have programmed the handset PIN, you cannot confirm it. We recommend
you write down the handset PIN. If you forget it, please consult your nearest
Panasonic Service Centre.
Follow steps 1 to 3 shown above, then:
4
Select “Change H/S PIN”.
5
Enter current 4-digit Handset PIN.
6
Enter new 4-digit Handset PIN.
7
Enter new 4-digit Handset PIN again
to verify.
500AL_e.book Page 41 Monday, June 30, 2003 3:17 PM