Filter
Top Products
43
Receiving Faxes
AUTO ANSWER
JOG DIAL
SET
Display
If you have a telephone line just for faxes, we recommend the following setup.
Example: One telephone line is used for voice calls and a separate telephone line for faxes.
FAX ONLY mode!
(all calls are received as faxes)
1
Set feature #77 to “FAX ONLY” (p. 68).
2
If the arrow (▼) is not shown on the right of
the display, turn it on by pressing
.
●
The display will show the number of rings
before the unit answers a call in the FAX
ONLY mode.
Display:
3
If necessary, rotate until the
desired ring count is displayed, and press
.
Display:
ON
●
When receiving calls, the unit will
automatically answer all calls and only
receive fax documents.
▼
SET
JOG DIAL
AFTER 3 RINGS
PICKUP & RCV FAX
AUTO ANSWER
Line 1 – Voice calls
Line 2 – Fax calls
Only a fax machine is connected.
Activating the FAX ONLY mode
Note:
●
If the arrow (▼) is already shown on the right of the display and you wish to change the ring count, turn
the arrow off once then on again by pressing and follow the instructions in step 3.
●
This mode should not be used with a telephone line which is used for both voice and fax calls. Fax
communication will be attempted even if someone is trying to call you.
AUTO ANSWER