Filter
Top Products
Advanced Operation
“
41
Line Selection
The unit will automatically select a free line which is not being used by a
parallel connected telephone when you make a call. Also the unit will
select the called line when you answer a call. To change the selection,
program as follows.
Make sure that the handset is on the cradle, the AC adaptor is
connected and the SP-PHONE/HEADSET indicator light is off.
1
Press (FUNCTION/EXIT).
2
Press (_) or (^) repeatedly until “LINE
SELECTION ?” is displayed.
3
Press (fl) OK/EDIT.
≥The current selection is displayed.
LINE1: Line 1 will be selected.
LINE2: Line 2 will be selected.
AUTO: A free line will be selected
(LINE 1 has priority) when
making a call. The called line will
be automatically selected when
answering a call (factory preset).
4
Press (_) or (^) to select the desired
setting.
5
Press (fl) OK/EDIT (SAVE key).
≥A beep sounds.
≥The display will return to step 2. To return
to the standby mode, press
(FUNCTION/EXIT) or wait for 60 seconds.
≥You can exit the programming mode any time by pressing (FUNCTION/EXIT).
≥Any line can be selected manually regardless of the mode selected in step 4 by
pressing the line button.
11:50
AM
11
/
24
LINE SELECTION ?
11:50
AM
11
/
24
SAVE AUTO# ?
11:50
AM
11
/
24
AUTO
1
=SAVE
PQQX12879ZA-BM03 01.3.7 3:52 PM y[W 41