Filter
Top Products
“
15
Preparation
Programming Summary of Preparations
You can program the following functions. The display shows the
programming instructions. See the corresponding pages for function
details.
Make sure that the handset is on the cradle, the AC adaptor is
connected and the SP-PHONE/HEADSET indicator light is off.
≥You can exit the programming mode any time by pressing (FUNCTION/EXIT).
Press (FUNCTION/EXIT).
Press (_) or (^) repeatedly until the desired function is displayed.
≥To store phone numbers in the speed dialer memory, see page 32.
≥To adjust the time and date, see page 16.
≥To store a voice mail access number, see page 35.
≥To set the voice mail tone, see page 36.
≥To change the line selection, see page 41.
≥To select the dialing mode, see page 13.
≥To turn on/off the incoming call tone, see page 42.
≥To select the flash time, see page 39.
≥To select the ringer volume, see page 18.
≥To select the line mode, see page 14.
≥To change the LCD contrast setting, see page 12.
Press (fl) OK/EDIT to go to the next step.
PQQX12879ZA-BM02 01.3.7 3:51 PM y[W 15