Filter
Top Products
67
Answering System
For assistance, please call: 1-800-211-PANA(7262)
Remote Code
The remote code prevents unauthorized people from accessing your unit
and listening to your messages. Choose any 2-digit number (00–99).
The factory preset remote code is “11”. If you do not program your own
remote code, you can use “11”.
Make sure the unit is not being used and the handset is lifted off the
base unit.
1
Press (FUNCTION/2WAY!REC).
2
Scroll to “Program” by pressing Ö or Ñ.
3
Press á.
4
Press á at “TAD program”.
5
Scroll to “Remote code” by pressing Ö
or Ñ.
6
Press á.
•The current setting is displayed.
7
Enter a remote code using a 2-digit
number (00–99).
8
Press á (Save key).
•A beep sounds from the base unit.
•To exit the programming mode, press (OFF).
•You can exit the programming mode any time by pressing (OFF)
.
To check the remote code
Repeat steps 1 to 6.
•The current remote code is displayed on the handset. When finished, press
(OFF).
Ringer pattern
H
Program
--------------
--------------
H
TAD program
Set flash time
--------------
H
Day and time
Remote code
Day and time
H
Remote code
Number of ring
Remote code
:11
H
=Save
Remote code
:35