Panasonic KX-TG2257PW, KX-TG2257S Telephone User Manual


 
48
Directory
1
Press (FUNCTION/2WAY!REC).
2
Press á at “Save directory”.
The display shows the number of stored items
in the directory.
3
Enter a name, up to 15 characters with the
dialing buttons, Ü or á.
See the steps for entering names and symbols
(p. 49).
If a name is not required, press Ö (Next key)
and go to step 5.
4
Press Ö (Next key).
5
Enter a phone number, up to 22 digits.
Each time you press
(HOLD/INTERCOM/CLEAR), a digit is erased.
To erase all of the digits, press and hold
(HOLD/INTERCOM/CLEAR).
6
Press Ö (Next key).
If you want to change the storing name or
number, press Ñ (Edit key) repeatedly to
reach the desired display and change it.
7
Press á (Save key).
A beep sounds.
To continue storing other items, repeat from step 2.
To exit the programming mode, press (OFF).
If a pause is required for dialing, (REDIAL/PAUSE) can be stored in a phone
number counting as one digit (p. 58) in step 5.
You can exit the programming mode any time by pressing (OFF)
.
If the display shows Directory full” in step 2, the display will return to step
1, press (OFF) to exit the programming mode. To erase other stored items from
the directory, see page 54.
If an alarm tone sounds in step 7, the item cannot be stored in the directory.
Place the handset on the base unit and try again from step 1.
--------------
H
Save directory
Ringer volume
Enter name
Tom Jones
IH G
=Next
Directory=
20 items
Enter name
IH G
=Next
Enter phone no.
0987654321
IH G
=Next
Tom Jones
098-765-4321
F
=Edit
H
=Save
Tom Jones
098-765-4321