Filter
Top Products
15
Preparation
Selecting the Line Mode
If the line is connected to a low voltage system such as a PBX, set to “B”.
Otherwise the unit may not ring and the Call Waiting Caller ID Feature
may not be accessible (p. 44). Your phone comes from the factory set to
“A”.
Make sure the handset is in the standby mode.
1
Press (FUNCTION/EXIT/CH).
2
Press (›) or (‹) repeatedly until the arrow
points to “Program”.
3
Press FWD/EDIT (fl) (Yes key).
4
Press (›) or (‹) repeatedly until the arrow
points to “Set line mode”.
5
Press FWD/EDIT (fl) (Yes key).
6
Press (›) or (‹) to select “B” or “A”.
Press FWD/EDIT (fl) (Save key).
≥A beep sounds.
≥To return to the standby mode, press
(FUNCTION/EXIT/CH).
≥You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
1
Save directory
Voicemail dial
43
1
=Yes
Ringer volume
1
Program
43
1
=Yes
1
Save DIRECT#
Set flash time
43
1
=Yes
1
Set line mode
Set dial mode
43
1
=Yes
Line mode
:A
43
1
=Save
Line mode
:B