Filter
Top Products
“
Settings
14
Selecting the Dialing Mode
If you have touch tone service, set to “Tone”. If rotary or pulse service is
used, set to “Pulse”. Your phone comes from the factory set to “Tone”.
Make sure the handset is in the standby mode.
1
Press (FUNCTION/EXIT/CH).
2
Press (›) or (‹) repeatedly until the arrow
points to “Program”.
3
Press FWD/EDIT (fl) (Yes key).
4
Press (›) or (‹) repeatedly until the arrow
points to “Set dial mode”.
5
Press FWD/EDIT (fl) (Yes key).
6
Press (›) or (‹) to select “Pulse” or
“Tone”. Press FWD/EDIT (fl) (Save key).
≥A beep sounds.
≥To return to the standby mode, press
(FUNCTION/EXIT/CH).
≥You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
1
Save directory
Voicemail dial
43
1
=Yes
Ringer volume
1
Program
43
1
=Yes
1
Save DIRECT#
Set flash time
43
1
=Yes
Set line mode
1
Set dial mode
43
1
=Yes
Dial mode
:Tone
43
1
=Save
Dial mode
:Pulse