Filter
Top Products
33
Useful Information
For assistance, please call: 1-800-211-PANA(7262)
Problem
You cannot redial by
pressing [PAUSE/REDIAL].
“RECHARGE” and “” are
displayed or the handset
beeps intermittently.
While talking, the call is
disconnected.
You charged the battery
fully, but “RECHARGE” and
“” are still displayed.
The IN USE/CHARGE
indicator light does not go
out while charging.
You cannot have a
conversation using the
handset.
You cannot have a
conversation using the
headset.
If you cannot solve your
problem
Cause and Remedy
≥When pressing [PAUSE/REDIAL] after
, more than 32 digits long
number will not be redialed correctly.
≥When pressing after
[PAUSE/REDIAL], more than 24 digits
long number will not be redialed
correctly.
≥The button functions as either redial or
pause. It will redial the last number
dialed if pressed at the outset of a call
(p. 11). If another number has been
dialed first, it will operate as a pause
button (p. 26).
≥Charge the battery fully (p. 8).
≥The battery needs to be recharged.
Charge the battery fully (p. 8).
≥Clean the charge contacts and charge
again (p. 9).
≥The battery may need to be replaced. If
you install a new battery, fully charge it
(p. 30).
≥This is normal.
≥When an optional headset is connected
(p. 27), you must use the headset to talk
with the caller. To have a normal
cordless phone conversation, disconnect
the headset.
≥Make sure that the optional headset is
connected properly (p. 27).
≥Visit our website at:
http://www.panasonic.com/support
≥Contact us via the web at:
http://www.panasonic.com/contactinfo
≥Call our customer call center at:
1-800-211-PANA(7262)
[ /FLASH]
[ /FLASH]