Filter
Top Products
19
Basic Operation
For assistance, please call: 1-800-211-PANA(7262)
Erasing Caller Information
After checking the Caller List, you can erase some or all of the entries.
Make sure the unit is in the standby mode.
To erase a specific caller from the Caller List
1
Lift the handset off the base unit and
press or to enter the Caller List.
2
Scroll to the caller you want to erase from
the Caller List by using or .
3
Press [MUTE/CLEAR].
≥A beep sounds and the information is
erased.
≥After a few seconds, the display will show
the next or previous caller information.
To erase all entries in the Caller List
Before erasing all entries, make sure that “” is not displayed in the
recent Caller List.
1
Lift the handset off the base unit and
press or to enter the Caller List.
2
Press and hold [MUTE/CLEAR] until
“CLEAR ALL CID?” is displayed.
≥“CID” stands for Caller ID information.
3
Press [MUTE/CLEAR].
≥A beep sounds and all entries are erased.
≥The handset will return to the standby mode.
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
CLEARED
CLEAR ALL CID?
REAGAN,TOM
NO ITEMS STORED