Filter
Top Products
Handset Phonebook
39
For product assistance, visit www.globarange.com
For A assistance, visit www.joip.com
Handset phonebook
You can add up to 100 items to the
handset phonebook and search for
phonebook items by name.
Important:
L Call Display subscribers can use
ringer ID and light-up ID features
(page 43).
L You can add and edit phonebook
items by accessing your account on
the A website (www.joip.com), then
downloading your web phonebook to
the base unit. To import them to your
handset, see page 72.
Adding items to the handset
phonebook
1
{C}
2 {ADD}
3 Enter the name (max. 16 characters;
see the character table, page 39).
i {OK}
4 Enter the phone number (max. 32
digits). i {OK}
L If you do not need to assign the
ringer ID and light-up ID, go to
step 9.
5 {V}/{^}: “Set Ringer ID” i
{SELECT}
6 {V}/{^}: Select the desired ringer ID
(page 43). i {OK}
L When selecting “No Ringer
ID”, the ringer tone set for the IP
line rings (page 54).
7 {V}/{^}: “Set Light-up ID” i
{SELECT}
8 {V}/{^}: Select the desired light-up
ID (page 43). i {OK}
9 {SAVE}
L To add other items, repeat from
step 3.
10 {OFF}
Note:
L In step 2, you can also press {MENU}
i {V}/{^}: “New entry” i
{SELECT} instead of pressing
{ADD}.
L If you select “No Ringer ID”
(default) in step 6, the handset uses
the ringer tone you selected on page
54 when a call is received from that
caller.
L If you select “No Light-upID”
(default) in step 8, the handset uses
the ringer indicator colour you
selected on page 52 when a call is
received from that caller.
Character table for entering names
Note:
L To enter another character that is
located on the same dial key, first
push the joystick right to move the
cursor to the next space.
Editing/correcting a mistake
Push the joystick left or right to move the
cursor to the character or number you
Key Character
{1} #&’ ( ); ,–./1
{2} abcABC 2
{3} def DEF 3
{4} ghi GHI 4
{5} jklJKL5
{6} mnoMNO 6
{7} pqrsPQRS7
{8} tuvTUV8
{9} wxyzWX YZ9
{0} Space 0
{#} #
GT15xxC.book Page 39 Tuesday, July 24, 2007 7:17 PM