Palm Series 3 Bluetooth Headset User Manual


 
CHARGING YOUR HEADSET
3
USER GUIDE
Charging your
headset
Your headset contains a rechargeable
battery that you must fully charge before
using the headset for the first time. You
can use your fully charged headset for up
to 5 hours talk time or 70 hours standby
before you need to recharge it.
The charging adapter included with your
headset works only with the AC charger
provided with your Treo™ smartphone or
with a replacement Palm
®
AC charger,
which you can purchase separately.
IMPORTANT Using an AC charger that is
not supported by Palm may damage or
destroy your headset and can void the
warranty on the product.
Charging your headset
1 Connect the charging adapter to the
charging pocket.
2 Connect your AC charger to the
charging adapter at the base of your
charging pocket and then plug the AC
charger into a wall outlet.
3 Insert your headset into the charging
pocket. The indicator light on your
headset glows red while your headset is
charging. Charge for three hours for a
full charge, until the indicator light turns
off.
4 Remove the AC charger from the
charging adapter.
You are now ready to pair your headset and
your smartphone.
AC charger
(not included)
Headset
Charging
pocket
Charging
adapter