Filter
Top Products
me
9
10
MULTI-HANDSET USE
Register a new handset
Register up to 4 handsets to your Touch base and register
your Touch handset with up to 4 bases. Handsets and bases
must be GAP compatible. New handsets must be fully charged.
1 Press , then scroll or , or press to select
SECURITY SET and press .
2 Scroll or , or press to select REGISTRATION and
press .
3 Scroll or to select the base you want to register
to and press .
4 Enter the 4 digit PIN code (default 0000) and press .
5 Press and hold at the base. The base indicator
light flashes. The handset attempts to register with the base.
6 When registration is complete REGISTRATION ACCEPTED
is displayed.
RETRY is displayed if registration fails, press to retry
or to exit. To test the handset is registered, press
on the base and the handset should ring. Press again
to stop the ring.
Select a base to use
1 Press , then scroll or , or press to select
SECURITY SET and press .
2 Scroll or , or press to select SELECT BASE
and press .
3 Scroll or to select the base number and press
to confirm. ACCEPTED is displayed when the base has
been selected.
RETRY is displayed if base selection fails, press to retry
or to exit.
De-register a handset
1 Press , then scroll or , or press to
select SECURITY SET and press .
2 Scroll or , or press to select DEREGISTRATION
and press .
3 Scroll or to select the handset you want to
de-register and press .
4 ACCEPTED is displayed when the handset has de-registered.
RETRY is displayed if de-registration fails, press to retry
or to exit.
Make internal call
1 Press and scroll or then press , or enter
the handset number directly you want to call.
2 The called handset rings and can press to answer
the call.
3 Press to end the call.
Delete an entry/all entries
1 During standby mode, press or to open the
calls log.
2 Press or to scroll to the entry you want.
For DELETE ALL, scroll and display any entry.
3 Press , then or to DELETE RECORD or
DELETE ALL and press to confirm.
Voice Message/Message Waiting
You have to subscribe to a voice message service (eg
Telstra Message Bank) provided by your service provider to
use this feature. When you receive a voice message your
Touch handset will display the symbol and the voice
message wait light on the base will flash to alert you when
you have new voice messages.
• To listen to your voice messages follow the instructions
given by your service provider.
• When you retrieve your messages the symbol
will turn off.
To clear the icon manually
1 Press , then scroll or , or press to
select SECURITY SET and press .
2 Scroll or , or press to select CLEAR MSG
WAIT
and press .
3 Scroll or to select YES and press to
confirm.