Filter
Top Products
touch
Touch Activated Keypad
Unlike other phones your Touch phone has a ‘touch
activated keypad’. The touch activated keypad will
automatically disable when you hold the handset receiver
to your ear. The idea being, to reduce the risk of accidental
keypad presses while the phone is held against the
side of your face. Likewise, the keypad also disables
automatically 5 seconds after the last key press. To ‘wake’
the keypad to enable you to dial further digits, e.g. if you
want to access the menu, you should touch any of the
number keys, wait for the backlight to come on and
then you can dial normally. It is very easy to tell when the
keypad is disabled, as the keypad backlight will not be on.
Additionally if you want to manually disable the keypad
when carrying the handset to prevent accidental key
operations, just press followed by the key. The
manual keylock feature cannot be activated during a call. A
key icon will appear in the top left of the display to show
the keys are locked, pressing followed by the will
unlock the keys again for use.
To return to standby mode at any time, press
Make a call
Press , wait for the dial tone and dial the number.
Preparatory dialling
Enter the number first, then press to dial or to
cancel.
Press to delete digits.
Switch to handsfree/speakerphone during a call
Press . SPKR will be displayed. Press again to go
back to the handset.
Adjust the call volume
During a call, press or to increase/decrease
the volume.
End a call
Press or place the handset on the base/charger.
Receive a call
When the phone rings, lift the handset from the
base/charger and press .
If auto-answer is on and the handset is in the base:
Lift the handset to answer the call. You do not need to
press .
Redial a number
Press , then . Or
Press , then press or to scroll to any of
the last 20 dialled numbers and press to dial.
Mute ON/OFF
Mute your voice so the caller cannot hear you. During a call:
Press to switch mute ON/OFF. MUTE will be shown
on the display.
Call waiting
To use Call Waiting you must subscribe to the relevant
service from your network provider.
During a call, you will hear two loud beeps periodically to
notify you of another incoming call. If you wish to answer
this call:
1 When the handset receives a second call, the number of
the caller appears on the display. It will display for 60
seconds or until you press a key on the phone. Press
listen for dial tone then Press to put the current
call on hold and talk with the second caller.
2 To toggle between calls press listen to dial tone then
press .
Caller information of this second call will be stored in the
call log.
If you have subscribed to your telephone network operators
Call Waiting Caller ID service (Australia only), your phone
will display the number of the second incoming call for
around 60 seconds while you are talking on the phone.
Page a handset
Press on the base. Handset(s) will ring.
To stop the paging ring, press again or press any
key on the handset.
Phonebook
Store up to 60 phonebook entries. Names up to 16
characters, numbers up to 24 digits.
Store a phonebook entry
1 Press then twice.
2 Enter a name using the keypad and press .
3 Enter a number using the keypad and press to
confirm.
1
2
USING YOUR PHONE