Filter
Top Products
29 of 72
Caller ID
If you subscribe (charges may apply) to your telephone service
providers Caller ID service, numbers of the incoming calls will be
displayed on the display and stored in the call log. (Please consult
your telephone service provider for details about this service)
When an external call comes in, the display will show either:
• The name of the phonebook entry if the number of the incoming
number is the same as the number of the phonebook entry, or
• The first 10 characters of the name of the phone book entry, or
• The last 16 digits of the number of the phone book entry if the
name is unavailable, or
• NOT AVAIL for Out of Area calls and PRIVATE for Private calls
The
icon will be displayed if the number of the CID is displayed and
has more than 16 digits.
When you have new/unanswered calls, the
icon on all the
handsets that currently connected to the same base unit will be
turned on.
Call Waiting Caller ID
If you have subscribed to your telephone network operators Call
Waiting Caller ID service, your phone will display the number of the
other incoming call for around 7 seconds while you are talking on the
phone.
• While the handset is on an external call, a series of short beeps is
heard.
• Press
then will place the first external call on hold and
answer the 2
nd
call.
• Press
then to toggle between two calls.
(Please consult your telephone service provider for details about the
service).
30 of 72
Call Log
The call log stores the last 20 unanswered and answered incoming
calls, up to 10 characters for names or prompt messages, 18 digits for
numbers, date and time.
If a number has been identified several times, it will be stored each
time the phone rings. Once the 20 numbers are stored the next
incoming unanswered or answered call will replace the first stored
number.
Once the call log has been reviewed, the
icon on the display of
that handset will turn off.
Note: The call log is stored on the handset. Deletion of call records on
one handset is not applicable to all other handsets registered to
the same base unit.
Reviewing the Call Log
• Press
during predial or standby.
• The most recent received CID is displayed.
• If the call log is empty, EMPTY will be displayed for 2 seconds
and returned to standby.
• Press
to view the next available information. For example,
pressing
on the name will bring out the first 16 digits of the
number with the
icon turned on. Press again to view the
remaining digits and the
icon is on. Press again to display
Date / Time and pressing
at Date / Time will display the name
and so on.
• Use
to scroll through the call log.
• To exit, press