Oricom ECO710 Cordless Telephone User Manual


  Open as PDF
of 40
 
30
ANSWERING MAChINE SETTINGS
(ECO710 ONLY)
• Iftheremoteaccesscodeiscorrect,aconrmation
beepcanbeheard,andthenyouneedtopress
the2key,within8seconds,tostartplayingany
messages.
The remote feature lets you perform
the following functions:
ToPressthisbutton
Review message 1
Playbackmessages 2
Stopmessageplayback 8
Erasemessage(duringmessageplayback) 6
Skipmessage 3
Turn on answerer machine 7
Turnoffanswerermachine 9
• Iftheansweringmachineisoff,andthemaster
PINhasbeenchangedfromitsdefault0000,itwill
answerthecallafter10rings.DialthemasterPIN
codewithin8secondsandyouwillhearabeepto
conrmyouhaveenteredtoremoteaccessmode,
asabove.
Set the OGM voice language
(optional)
1. Press the
MENU
keytoentermenuselection.
2. Press the
Navigation
keytoselectANSW
MACHINEandthenpress
OK
keytoselect.
3. Press the
Navigation
keytoselect
SETTINGSandthenpress
OK
keytoselect.
4. Pressthe
Navigation
keytoselect
LANGUAGEandthenpress
OK
keytoselect.
5. Press the
Navigation
keytoselectyour
preferred language and then press
OK
keyto
conrm.
6. Aconfirmationbeepisplayed.Press
END
keytogobacktostandbymode.
Call screening
Call screening allows you to hear the caller while he
is leaving a message.
Youcanthendecideifyouwanttotalktothecaller
directly.
Toadjustthespeaker’svolumeduringcallscreening,
press
+
and
-
keysonthebasestation.Thelowest
volume level turns call screening off.
Default settings
These are the answering machine settings after the
unithasbeenreset.
AnsweringMachine-ON
Answermode–ANSW.&RECORDmode
Numberofringsbeforeanswer–5Outgoingmessages
–PredenedOGM.(PersonalizedOGMsdeleted)
Remoteaccess–Deactivate
Basespeaker–Level5
 previous next