Oricom ECO710 Cordless Telephone User Manual


  Open as PDF
of 40
 
22
The outgoing message
The model is supplied with two predefined outgoing
messages(OGM)usedforthedifferentanswermodes.
Thereare2answermodesavailable:AnswerOnly
andAnswer&Record.
Bydefault,theanswermodeisANSW.&RECORD,
which allows a caller to leave a message on the
answeringmachine.Thiscanbechangedto
ANSWERONLYmode,whichdoesnotallowcallers
to leave any messages on the answering machine.
Set the answer mode
1. Press the
MENU
keytoentermenuselection.
2. Press the
Navigation
keytoselectANSW
MACHINEandthenpress
OK
keytoselect.
3. Press the
Navigation
keytoselectANSWER
MODEandthenpress
OK
keytoselect.
4. Pressthe
Navigation
keytoselectANSWER
ONLYorANSW.&RECORDandthenpress
OK
keytoconrm.
Answering machine operation
by handset (eco710 ONLY)
Youcanusetheanswermachinemenuonthe
handset to access and change the settings for all the
answering machine functions.
Turn the answering machine on or off
1. Press
MENU
keytoentermenuselection.
2. Press the
Navigation
keytoselectANSW
MACHINEandthenpress
OK
keytoselect.
3. Press the
Navigation
keytoselectANSW.
ON/OFFandthenpress
OK
keytoselect.
4. Pressthe
Navigation
keytoselectONorOFF
and then press
OK
keytoconrm.
5. Aconrmationbeepisplayed.Press
END
key
togobacktostandbymode.
• Youcanalsoturntheansweringmachineonoroff
bypressingthe
ON/OFF
keyonthebase.
• If the answering machine is turned off and the
masterPINisstillsetatitsdefault0000,the
answering machine will not answer to any incoming
ringing,butifthemasterPINhasbeenchanged,it
will answer after 10 rings to allow remote access.
ANSWERING MAChINE OPERATION
BY hANdSET (ECO710 ONLY)
 previous next