34
Answer machine settings
Set the answer mode
Youcansettheansweringmachinetoanswerandrecordmessage
(ANSWER&RECORD)ortojustansweracallandplayanoutgoing
message,butnotallowthecallertoleaveamessage(ANSWER
ONLY)
1. PressMENU/OKwheninidlemodetoenterthemenulist.
2. PressMENU/OKtoselect>ANS.SYSTEM.
3. PressUP/DOWNtoselect>SETTINGS,
4. PressMENU/OKandUP/DOWNtoselect>ANSWERMODE.
5. PressMENU/OKandUP/DOWNtoselectANSWER&RECORD
ANSWERONLY.
6. PressMENU/OKtoconrmyourselection.
Set the answer delay
Youcanselecttheansweringmachinetoansweracallaftera
differentnumberofrings(2,4,6,8orTollSaver).
1. PressMENU/OKwheninidlemodetoenterthemenulist.
2. PressMENU/OKtoselect>ANS.SYSTEM.
3. PressUP/DOWNtoselect>SETTINGS.
4. PressMENU/OKandUP/DOWNtoselect>ANSWERDELAY.
5. PressMENU/OKandUP/DOWNtoselect2,4,6,8orTOLL
SAVER.
6. PressMENU/OKtosaveyourchoice.
NOTE
IfTollSaversettingisselected,theansweringmachinewillpickupafter
two rings if there are new messages and after four rings if there are no new
messages.
OGM settings
This is the message your callers hear on the answering machine.
There are two pre-recorded outgoing messages, or you can record
your own.
Record the outgoing message
1. PressMENU/OKwheninidlemodetoenterthemenulist.
2. PressMENU/OKtoselect>ANS.SYSTEM.
3. PressUP/DOWNtoselect>SETTINGS,andthenpressMENU/
OK.
4. PressUP/DOWNtoselect>OGMSETTINGS.
5. PressMENU/OKtoselectRECORD.
6. PressMENU/OKandUP/DOWNtoselectANSWER&RECORDor
ANSWERONLY.
7. PressMENU/OKtostartrecordingaftera“beep”soundis
heard.
8. PressMENU/OKtostoprecordingandsavethemessage.The
justsavedmessageisplayedautomatically.
9. PressTALKOFF/BACKatanytimetostopplaying.
usinG your answerinG maChine