Oricom BT9500 Telephone User Manual


  Open as PDF
of 44
 
21
2. Toanswerthecallontheotherhandset,pressTALK/Ror
SPEAKER.Theoutsidecallisstillonholdandbothhandsets
nowshowINTERCOM,andyoucanhaveaprivateconversation
with the other handset.
• Youcantransferthecall.PressTALKOFF/BACK,orplaceyour
handsetbackinthetelephonebaseorcharger.Yourscreen
shows CALL TRANSFERED. The other handset is automatically
connected to the outside call.
• TheotherpersoncanleavetheintercomcallbypressingTALK
OFF/BACK,orplacingtheotherhandsetbackinthetelephone
base or charger. The outside call continues with the original
system handset.
• Ifyouwanttocancelanintercomcallandreconnecttothe
outsidecallbeforetheotherhandsetanswers,pressTALKOFF/
BACKonyouroriginatinghandset.
• Iftheotherhandsetdoesnotanswertheintercomcallwithin
100 seconds, is being used, or is out of range, your originating
handsetscreenshowsUNABLETOCALLTRYAGAINand
reconnects to the outside call automatically.
Make a 3-way Conference Call
Conference allows one external call to be shared with two
handsets,soallthreepartiescanshareaconversationwithoutany
additional network subscription.
During an external call, after you set up an intercom call with
anotherhandset(seeabove),pressandholdtheINTbuttonto
establish the conference call and the display shows CONFERENCE.
EitherhandsetcanexittheconferencebypressingTALKOFF/BACK,
leavingtheotherhandsetstillconnectedtotheexternalcall.
interCom
 previous next