Filter
Top Products
36USING THE ANSWERING SYSTEM
(Slim8800 ONLY)
4. Scroll [ ] or [ ] to select ON or OFF.
5. Press [
] to con rm.
To access the answering machine menu via the Calls list
When the
is ashing to indicate new messages you can
see caller details via [ ] or press [ ] again to go to ANSW
MACHINE to play new messages.
1. Press [
], CALL LIST is displayed.
2. Press [ ], ANSW MACHINE is displayed.
3. Press [ ], PLAY is displayed.
4. Press [
], the handset will start the new message
playback. Once all messages are played, the handset will
return to standby.
NOTE
During message playback, press [ ]
anytime to return to standby.
Memory full
The memory is full if there is less than 15 seconds of recording time
left or if the maximum total of 59 messages has been reached.
When the memory becomes full:
• The LED will ash quickly.
• The
ashes quickly on the handset display.
• The machine will automatically switch to Answer Only mode.
If the memory becomes full while a caller is leaving a message,
they will hear a beep and the call is ended.
To set TAM Language
1. Press [ ], scroll [ ] or [ ] to ANSW MACHINE and
press [
].
2. Scroll [ ] or [ ] to ANSW SETTINGS and press [ ].
3. Scroll [
] or [ ] to TAM LANGUAGE and press [ ].