Oricom 8000 Cordless Telephone User Manual


 
28ADVANCED SETTINGS
Advanced settings
This setting is useful to access certain network and PBX/
switchboard services.
To set the Recall time
You can use the Recall button on your telephone when using your
network operator’s services such as call waiting etc. A subscription
may apply for these services contact your network operator for
more information. If this function is not working correctly change
the setting using the instruction below:
1. Press [
], scroll [ ] or [ ] to ADVANCED SET and press
[
].
2. RECALL TIME is displayed. Press [
].
3. Press [ ] or [ ] to select the setting you want: SHORT,
MEDIUM, LONG.
4. Press [
] to con rm.
5. Press [
] to return to standby.
Note
Recall 1 (Short) has been set to 100ms and Recall 2 (medium) has been set to
250ms and Recall 3 (long) has been set to 600ms. Recall 1 = Australia (100ms),
Recall 3 = New Zealand (600ms). The default is Recall 1.
The user has the option to adjust the time to short, medium or long (100, 250, or
600) if the unit is being used in a situation that differs from the network standard.
The default recall time is suitable for your country and network operator. It is
unlikely that you should need to change this setting unless advised to do so.
Call barring
Prevent certain numbers from being dialled from your Slim. Store
up to four speci c numbers, each up to 4 digits, for example,
international or local pre xes.
NOTE
If you switch Call barring on, BARR MODE ON will be displayed on your screen
in standby mode.
To switch call barring on/off
1. Press [ ], scroll [ ] or [ ] to ADVANCED SET and press
[
].
2. Scroll [ ] or [ ] to CALL BARRING. Press [ ].
3. Enter the master PIN (default setting 0000) and press [ ].
4. MODE is displayed. Press [
].
5. Press [ ] or [ ] to select ON or OFF. Press [ ] to con rm.
6. Press [ ] to return to standby. You can now set the number
(See below).