Filter
Top Products
16USING THE PHONE
4. Press [ ]to switch between both callers.
5. Press [
] to hang up.
To make a three way conference call
1. During an external call, press [ ]. Your caller is put on hold.
2. Enter the number of the handset you want to call or press
[ ] to ring all handsets. If there are only two handsets, the
other handset is called automatically.
3. When the other handset answers, announce the call then press
and hold [
] to connect both calls. If the other handset does
not answer, press [
] to talk to your caller again.
4. Press [
] to hang up.
Recall feature
Recall feature can be used when you are using some services
provided by your network operators such as “call waiting”, etc. A
subscription may apply for these services, contact your network
operator for more information.
While you are talking on the phone, press [
] key on the cordless
handset to send a Recall.
Call waiting (Australia Only)
You can use the recall function to answer a second call while you
are on the phone. However this service needs to be turned on. For
example, to turn on Telstra’s Call Waiting service:
1. Press [
] on the cordless handset to wait for dial tone then
press[
] [ ] [ ] [ # ].
2. You will hear a service tone then press [
] again.
Take two different calls at the same time
During a call, you will hear two loud beeps periodically to notify you
of another incoming call. If you wish to answer this call,
1. Press [
] key. You will hear a dial tone.
2. Press [
] to put the current call on hold and talk with the
second caller.
3. Repeat steps 1-2 to swap between the two callers.
Recall function when connected to a PBX
If you have connected this telephone to an of ce PBX, you can use
all the facilities such as call transfer, automatic recall, etc. The
[
] key provides access to these facilities. If you need to change
the Recall setting for use on an of ce PBX system follow the
instructions on page 30.