Filter
Top Products
Button Mapping on the Handset / 41
T7406 Installation Guide
Memory buttons store telephone numbers or feature codes to give you
one-touch dialing or feature activation. For more information about
memory buttons, refer to Memory buttons
on page 38.
Handset Asleep (Save Battery Mode)
When the handset is idle for longer than 15 seconds, it automatically
goes into Handset Asleep mode to conserve the battery. Incoming calls
automatically wake up the handset from the Handset Asleep mode.
Pressing any button on the dialpad also wakes up the handset.
Handset Asleep Mode Feature Conditions
If the handset is in Handset Asleep mode, the following features are
affected:
• To receive Message Waiting Indication (MWI) when the handset
is in Handset Asleep mode, press any button on the dialpad to wake
up the handset.
•If the Ring Again feature is active, and the handset goes into
Handset Asleep mode, there is no indication of the Ring Again
feature until you press a button on the dialpad to wake up the
handset. To use the Ring Again feature, press any button on the
dialpad to wake up the handset.
Note: When the handset is awake, the Ring Again feature
provides both an audio and a visual indication that the
feature is active.
• If the Do not disturb (DND) feature is active when the handset is in
Handset Asleep mode, there will be no visual notification of
incoming calls, including Priority calls.
Priority calls when DND is active: When the handset is in
Handset Asleep mode and a Priority call is made to the T7406,
Ring Again
*
≤¤
Transfer ≤‡‚
Voice Call ≤flfl
Notes:
*
In sleep mode, the user receives visual indication only. There
is no beep tone indication.