Filter
Top Products
32 / Handset Configuration
P0942257 04
6. Press
OK
.
The display shows
Confirm New PWD
.
7. Re-enter the password.
8. Press
OK
.
The display shows
PWD Changed!
.
9. Press the Options button to exit the Option menu
The display changes to show the date and time.
Password errors
If you enter an incorrect password and the display shows
PWD Error!
,
return to the
7. Chg Password
menu item and try again.
Lost password
Make a note of the new password. If you forget your password, you will
need to contact your Distributor for help to unlock the set.
Assigning the Security Code
After you assign the handset ID # to a handset, you need to configure
the handset to a base station.
Follow these steps to assign a Security code to the handset.
1. Press the Options button.
2. Press
SHOW
.
3. Press
NEXT
until the display shows
4. Set S.S. Code :
.
4. Press
CHANGE
to assign a security code to the handset. The display
shows
Enter Password
.
5. Enter the six-digit password (default 000000).
6. Press
OK
. The display shows
Press 6 digits
.
7. Enter the six-digit Security code.
The display changes to show the code as entered.
8. Press
OK
to accept the code.
The display shows
4. Set S.S. Code :
.
If you are assigning a handset to an existing base, your handset is now
connected to the system.