Filter
Top Products
48
Talk with more than one person
Selectable Conferee Display and Disconnect
You can view the list of active conferees by using the Conferee Selectable Display
Key and disconnect any party that has been added to the conference call. This
feature is not available on the Meridian SL-100 system.
To view active conferees:
1. While on a conference call, press the
Conferee Selectable Display Key. The
LCD indicator turns on. With each key
press, the screen changes to show a
different active conferee.
Note: This action has no effect on the
displays of the other telephones involved in
the conference.
/
2. Press the Goodbye Key. If configured,
the Conference Count Display returns.
The LCD indicator turns off.
To disconnect a conferee:
1. While on a conference call, press the
Conferee Selectable Display Key. The
LCD indicator turns on. Continue to
press the key until the conferee you
want to delete appears on the screen.
2. Press the Line (DN) Key on which the
conference call is established. The
selected conferee is disconnected from
the call.
Note: If there are additional conferees to
be disconnected, press the Conferee
Selectable Display Key until the conferee
that is to be disconnected is displayed on
the screen.
/
3. Press the Goodbye Key. If configured
the Conference Count Display returns
and is updated to reflect the revised
total count of conferees. The LCD
indicator tuns off.
ConfSelDsp
Goodbye
ConfSelDsp
2637
Goodbye