Nortel Networks M3902 Cordless Telephone User Manual


 
111
Set-to-Set Messaging
Set-to-Set Messaging
With the Set-to-Set Messaging application activated (available on the M3903
and M3904), an internal caller using an M3903 or an M3904 receives a quick
visual message, which you have selected, whenever they dial your telephone
number. The length of your message is limited to 24 characters. The message is
entered through the dial pad keys using a process similar to the one used for
entering names in the M3904s Personal Directory. Your network administrator
may provide access to a list of up to ten messages which you may customize and
select as your current set-to-set message. Only one message at a time may be
customized and only one message can be stored.
You can check your Call Log to determine whether or not a caller was sent the
set-to-set message. A * (M3903) or (M3904) will appear beside the call log
entry of the callers who saw your message. Note: This feature is not available on
the Meridian SL-100.
To access Set-to-Set Messaging:
/
1. Press the Applications Key.
2. From the Applications menu, use the
Navigation Keys to highlight Set to
Set Messaging.
3. Press the Select Key.
The Set-Set Msg screen appears
indicating the status of the feature (on
or off) and whether or not a message
is stored (defined) in memory.
Note: On the M3904, if you have
activated password protection on your
Directory/Log, you will need to enter your
password to continue.
To edit the currently stored message,
or to create a new message:
1. Press the Edit Key.
Applications
Set to Set Messaging
Select
Edit