Filter
Top Products
5
Page ≤fl‚ and the code (1 to 3) and zone
(Zones 0 to 6 on Modular ICS and zones 1 to 3 on Compact ICS)
Make a page announcement through either the internal (code 1) or
external (code 2) speakers, or both (code 3). Zone 0 on the Modular
ICS pages all zones.
Page announcements are programmed to timeout after a pre-selected
amount of time which is set by your system administrator.
Internal page ≤fl⁄ and zone
Make a page announcement to all, or to a specific group of
telephones, through the telephone speakers.
External page ≤fl¤
Make a page announcement through an external loudspeaker system.
Internal and external page ≤
≤≤
≤fl‹
fl‹fl‹
fl‹ and zone
Make a page announcement through both your telephone speakers
and an external loudspeaker system.
Pause ≤‡°
Program a 1.5 second delay
Ý
, into an external autodial sequence.
For pulse dialing: • also inserts a 1.5 second delay.
Priority Call ≤fl·
Interrupt a person who is on a call.
A person on another call can press ≤°fi (Do Not Disturb) to
block priority calls.
Privacy ≤°‹
Change the privacy setting for an external line. If a line normally has
privacy, this permits another telephone that shares the line to join your
call by selecting the line while you are using it.
If a line normally has privacy disabled, this prevents another telephone
that shares the line from joining your call by selecting the line while you
are using it.
The privacy setting is re-established once you end your call or when
you enter the Privacy feature code again.
Ring Again ≤¤ Cancel ≤£¤
Monitor a busy or unanswered telephone, or a busy line pool within
your system. Ring Again signals you to call back when the telephone
or line pool becomes available.
Ring type ≤•fl
Select a distinctive ring to help differentiate between your telephone
and others nearby.
1. Press ≤•fl.
2. Enter the ring type number (⁄ to ›) then press ≥.