Filter
Top Products
3
Conference
continued
To independently hold two calls:
Press the line or intercom button of the first caller, then press ≥.
The second caller is automatically put on hold. To re-establish the
conference, retrieve one call from hold, press ≤‹, then retrieve
the second call from hold.
Contrast
adjustment
≤•‡
Adjust the contrast of your display.
Press ≤•‡, then press a number from ⁄ to · (depending on
your telephone). Press ≥ to set your choice.
Dialing
modes
≤•°¤
Choose one of three methods of dialing.
1. Press ≤•°¤.
2. Press £ to select the mode.
3. Press ≥ to store the mode.
Standard Dial: Select a line, then dial the number. (Standard Dial is
always available, even when another dialing mode is selected.)
Automatic Dial: Dial the number without choosing a line button first.
Your prime line is automatically selected for the call.
Pre-Dial: Dial the number, then press a line button to place the call.
Edit the number by pressing √ before placing the call.
Do Not
Disturb
≤°fi Cancel
≤£°fi
When you are not on a call prevent all incoming calls, except priority
calls, from ringing at your telephone. When you are on a call, block an
incoming priority call.
Group
Listening
≤°‚¤ Cancel
≤£°‚¤
Use both the handset and speaker while you are on a call. To avoid
electronic feedback, keep the handset away from the speaker during
the call, and press ®to hang up.
Hold ≥
Temporarily suspend a call.
To retrieve a held call, press the line button for the held call.
(Press ≥ on the T7100/M7100 telephone.)
Exclusive Hold ≤‡· or ≤ ≥
Temporarily suspend a call and prevent other telephones from picking
it up.
Language
Choice
≤•fi‚⁄ Select Primary Language for the telephone display.
≤•fi‚¤ Select Alternate Language for the telephone display.
≤•fi‚‹ Select Alternate Language 2 for the telephone display.
≤•fi‚› Select Alternate Language 3 for the telephone display.