Filter
Top Products
LIP-6830 User Guide
5 June 07
2. Using Basic LIP-6830 Features
The LIP-6830 is equipped with Softkeys and two direction buttons, used to navigate and select
items from the display menu. An item can be selected when it is displayed by using the
Softkeys. In some cases, either the Softkeys or a feature button may be used to access basic
features such as Conference. The Softkeys are also employed to access the ‘Advanced
Services’ to which your company has subscribed.
Some buttons on the LIP-6830 represent Lines or SIP call appearances. The Line buttons
present and manage calls to the specific Line or appearance. The LIP-6830 can support up to
24 Lines, each associated with their own Line button. The LED of the Line button indicates the
status of the Line as follows:
Green LED On – in use at this phone, when call is displayed in LCD.
Green LED fast flash – incoming call at this phone when call is displayed in the LCD.
Green LED slow flash – call on hold at this phone when displayed in the LCD.
Red LED On – in use at another phone.
Red LED fast flash – incoming call at another phone.
Red LED slow flash – call on hold at another phone.
Yellow LED On – in use at this phone when call is not displayed in LCD.
Yellow LED fast flash – incoming call at this phone when call is not displayed in LCD.
Yellow LED slow flash – call on hold at this phone when call is not displayed in LCD.
Green & Yellow LED alternate color slow flash – the line is not registered.
NOTE: When ACD is active on the Line the LED will indicate the status of the Agent:
Green LED On – Agent checked in and available
Red LED flashing – Agent checked in and unavailable
Red LED On – Agent checked out
2.1 Receiving a Call
When you receive a call, your phone will ring and the display may show the name or number of
the calling party.
To answer a ringing call:
1) Lift the handset, press , press , press the
[Answ] Softkey, or press Line button.
To refuse a ringing call:
1) Press
[Refu] Softkey in the ringing state.
To end the call:
1) Hang up the handset, press , press , press
[EndC] Softkey, or press Line button.
NOTE: Calls can not be received unless the Line is registered to call server. When not
registered, the Line button LED will blink red and orange.