Filter
Top Products
LIP-6830 User Guide
9 June 07
2.12 Speed Number Dialing
Within the Phone Book menu, you can set a Speed Number (00 to 99) for each Phone Book
record. The Speed Number can then be used to automatically dial the telephone number for the
record. Speed Number dialing must be enabled for use (refer to the Installer Guide for steps to
configure the Speed Number feature).
To make a call using Speed Number:
1) Dial the Speed Number (00-99) for the desired number, or lift the handset and dial the
desired Speed Number.
NOTE: When the Speed Number you dial is empty, the call is terminated and the LCD will
display the error “Empty speed number.”
2.13 DND (Do-Not-Disturb)
The DND (Do Not Disturb) feature places the LIP-6830 in a ‘no-ring’ state. If the LIP-6830 is in
DND, an incoming call to your extension will not cause the phone to ring. To use this feature,
the DND button must be assigned (refer to the Installer Guide for the steps to configure the
Flexible button).
To activate DND:
1) Press to activate DND; when activated, the button LED will illuminate red, and
“Do no disturb” is displayed on the LCD.
To deactivate DND:
1) Press the illuminated button again.
2.14 Muting a Call
Mute turns the microphone of the Handset, Headset, or Speakerphone Off. This prevents the
connected party from hearing what is said in the vicinity of the microphone.
To mute the microphone:
1) Press to mute a call; when mute is activated, the button LED is illuminated red.
To activate the Handset, Headset, or Speakerphone microphone:
1) Press again, or lift the handset to deactivate mute.
2.15 Accessing Your Voice Mail
When you have a message waiting, the MSG light will flash and messages may be retrieved.
To access your voice mailbox:
1) Press the MSG button when the Message Waiting Indicator LED indicates you have a
message. The display indicates the total number of messages waiting and the LED of Lines
with messages are red or flashing red.